The Dyno X is the world's most affordable chassis dynamometer. The Dyno X Series dynamometer is capable of supporting speeds up to 155 MPH and 800 HP. The maximum axle weight is 6,500 lbs and the track width range is 36"-86". The Dyno X was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. It is equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests.
TORQUE: 5000 ft lbs MAX SPEED: 155 ROLL DIAMETER: 8.5 Inches AIR REQUIREMENTS: n/a POWER REQUIREMENTS: 220/240/280
2WD Dyno X Ramps: Dynocom's aluminum ramps are the perfect combination of strength and weight. The price includes a pair of straight aluminum ramps with hook ends, 120 in length, 20 in width,5000 lb capacity per axle, 8500 lb capacity per vehicle.
Wireless OBDII : Our wireless module for OBDII Applications provides real time data from the OBDII port on all 1996 and newer vehicles. This data is available to be viewed live in the dynamometer software and is also recorded into the dyno run.
You can view all support channels of the OBDII data, such as spark advance, throttle position, engine coolant temperatures, inlet air temperature, calculated load, and numerous other parameters right along side your dyno results.
Optical Pick Up: Optical RPM Pick Up
Includes:
RPM Optical Laser Sensor, Magnetic Base with fine adjustment and T 5 Reflective Tape.
Operating Distance 3 feet (1.0 m) and 45° from T-5 reflective tape. Speed Range 1-250,000 RPM
Operating Temperature -14° to 158° F (-10° to 70° C)
Standard Cable 8 feet (2.4 m)
DC Fan: Dynocom supports plug-n-play options like an auxiliary output for a fan. Two options available. Pedestal fan for above ground applications and a floor fan for pit options. Plugs directly into the JBOX and turns on/off during dyno runs.
Axle Strap: Each AXLE STRAP assembly is fabricated with Polyester Latex Webbing having a 12,000 Lb. tension rating for optimum restraint-load retention performance, plus high abrasion and abuse resistance. Non-stretch characteristics of the webbing significantly increases assembly security and service life.
The Polyester Webbing protects the axle finish, brake lines, and other structural car members by eliminating all metal-to-metal contact and provides positive safe-secure tie-down of your car around axles.
8 ft Ratchet: 10,000 LB. RATED RATCHET WHEEL STRAPS. Load Rated Hardware which has been Treated for corrosion resistance. Test Rated polyester latex webbing for its high abrasion, abuse and resistance and non-stretch characteristics. Twisted Snap Hooks have spring-loaded keepers for secure attachment to trailer hardware or other Tie-Down.
Chock Blocks: These wheel chocks are paired molded rubber wheel chocks designed for multi-purpose, small radius tire use. A ribbed surface and wide base creates excellent tire and road contact adhesion.
They are paired two cavity wedges with 5/8" black/yellow Derby Poly Rope.
